what is construction lift
Construction lift is one of the most used types of lifts on the market. As you know, the construction lifts have different components that should be mentioned in a little bit, including electromotor, gearboxes, and winches, towing wires, retainers, pedestals, rails, cranks, hooks and buckets.
Components of the construction lift:
The motor in the construction lift causes the change of electric force to the rotational force which makes the wire rope move.
To adjust the electromotor speed, a gearbox is used which reduces the motor speed in order to increase the external force. The gearbox used in the construction lifts is usually of a spiral type that is locked when the motor fails or when a power failure occurs and does not return until an accident occurs.
Construction lift’s pulley:
This part of the lift is used to guide and retract wire ropes and prevent twisting of the wires. The pulley is usually made of steel to provide sufficient strength against abrasion and erosion.
A steel cord that has several cables in its core that are twisted together. This part is made in different sizes. This part transmits the rotational force generated by the electromotor to the lift bucket.
As mentioned, the lift bucket is used to transport materials such as cement and concrete. They are manufactured in different capacities depending on the force ported by the lift.
The lift stand:
This part places the lift on the surface, and the rails attach to those components of the chassis. An ideal lift has strong, secure stands, and the electromotor used has armature winding with full copper and high quality and low ampere and also has the high quality gearbox.
Essential tips on using construction lift:
The lift is designed to move materials, but some people mistakenly use it as an elevator, which can cause danger and harm for the person.
Considering the capacity provided for the lift bucket can extend the useful life of the device. For example, buckets with a useful capacity of 250 kg should be shed up to a maximum of 250 kg of material.
Instead of putting bags of sand on the lift’s pedestals, it is better to weld this part to the buildings iron because this will enhance the secure use of the construction lift.
If the building height is more than 25 meters, brake electro motors should be used to carry the load. Also, in unstable weather conditions, do not use a lift until the weather becomes stable.
How to set up construction lifts:
After mounting the lift and its components in place, you should position the pedestal at a suitable distance and then mount the rail on the pedestals. Then insert the screws and tighten them. To assure the base strength you can put some bag on them in order to prevent probable tremor.
Essential and basic tips for buying the construction lift:
Before choosing the right lift, you must first select the suitable lift to help you move materials with sufficient strength and security. To choose a construction lift, you need to take into account the various points that we will mention on a case-by-case basis.
Three-phase or single-phase local power supply is very important because you have to use an electric motor that is proportional to the power supply of the building.
The quality of the engine and the thickness of the chassis, the health of the rails and the lifts pedestals are things to consider when choosing a lift.
Engine speed is another thing to consider.
Considering the wire ropes, which is usually about 20 meters long, which can climb up to 20 meters.
When installing the construction lift, get help from a technical expert to get started with the least amount of time and risk.
As mentioned, use an electromotor that has a full copper coil and has enough power to lift the materials.