سبد خرید شما خالیست!
میتواند برای مشاهده محصولات بیشتر به صفحات زیر بروید :

Is it possible to move a person with a construction lift?

Moving a person with a construction lift

This is a question that may not be the answer, but it is tied to the lives and property of workers and construction workers. So we decided to take a look at the different questions and dimensions of the answers.

In general, there are always certain protocols and principles for working with any building material; it doesn't matter if you are working with a drill or a construction lift, there are some safety rules to follow.

In this note, we will first examine the safety tips for using a material lift, and then answer the question of whether it is possible to move a person with a material lift.

The answer to this question is not surprising and surprising, but it convinces you with reasoning and logic to follow the existing rules and experiences correctly. So stay with us until the end.

Before starting work with material lift

Well, suppose you are not in the process of installing a material lift, and now you are planning to work with it. The following safety tips will help you reduce your chances of accidents to zero.
However, it is always important in any case to consider a percentage of the chance of an unexpected accident.

First of all, carefully inspect the bases of the building lift chassis and make sure that it is firmly connected to the lower surface. Because this device is required for use in construction projects to be installed at the edge of roofs, make sure that the chassis joints are far enough away from the final edge of the edge.

If the base joints are too close to the edge, they may be damaged by double weights and removed from the base. In any case, consider the important security aspects of connecting the chassis to the ground.

After making sure the connections are up, go to the material lift chassis itself. Check the curves and knees of the chassis. A chassis may have a high resistance, but over time, it becomes tired and loses its strength.

It's a good idea to try the relative strength of the chassis with your hand pressure and weight. The chassis is the support of your device, and if it is cut, broken or bent, the whole device will fall and be damaged. If you see the effects of repair or welding on the chassis, it is better to check this issue more carefully and make sure that the repair is done.

After going through the previous steps, now it's time to test the performance of the device. Turn the engine lift on and off several times and make sure it is running smoothly. The entanglement in the engine and the gearbox of the building lift not only slows down or makes it difficult to do the work, but may cause the material lifter to shrug and ultimately cause irreparable damage.

After that, it is important to make sure that the rope or wire is healthy at a glance. It is the wire that carries the weight of materials and cargo and, if God forbid, breaks, it will pose a serious threat to employees in a matter of seconds.

Falling a bag of heavy materials, even from low altitudes, will simply kill the workers. Workshop safety rules require that you prioritize the protection of employees' lives.


Moving people with material lifts? Definitely not!

Our response is very negative, and we recommend that you never try this dangerous activity under any circumstances. But why moving people with building lifts is dangerous is related to some of the physical and mechanical principles that we'll explore below.

First of all, keep in mind that humans and humans are not opposed to inanimate objects. Falling materials may be dangerous only for people who are at a lower altitude, but it is not dangerous for the material itself because it is not fundamentally alive.

But the fall of a human being from the height of a building has no consequences other than death. So the risk in this case is the risk to a person's life.

Another important point is that the lift of the material does not rise in the bed of a rail or a special frame. Consider the elevator; As well as lifting the chamber with a motor and wire, the chamber itself is fixed within a rail frame.

This means that the side forces to the elevator car do not cause it to deviate from the path, but what about the lift of materials ?! The opposite is true! A building lift does not have a rail and a frame, and if, contrary to your prediction, it is out of balance with a side force such as wind force, the return of the cargo, which in this case is the life of a human being, is not possible.

It is enough to blow a strong side wind while moving a person; the person will fall quickly.

The material lift will usually be connected to the mobile compartment with a single wire; this means the least possible balance for the chamber. A chamber with only one wire in its abutment is not balanced at all.

Apart from external forces such as strong winds, even strong movement of individuals can upset its slight balance. Materials, because they are inanimate and immobile, are not a concern, but the mobility of a person can threaten the entire balance of the chamber.

Another thing that no one usually pays enough attention to is getting on and off the elevator. Riding may not be a big challenge, but what about getting off? The idea of trying to get out of the fifth floor of a building from unbalanced compartments is a nightmare.

No matter how much experience and skill you have, it may cause you to fall. So it is better to be more careful about this and not risk your life and the lives of your workers.


If you had to

Believe me, using lifts to move people is extremely dangerous, so we recommend that you use this tool in its original function. But if you want to risk your life or the lives of workers, try to follow the safety tips mentioned above to minimize the chances of an accident. This means it is better than nothing.

درج نظر
دسته بندی ها
دسته ها
0 سبد
دسته بندی ها
ماشین آلات ساختمانی
مصالح ساختمانی
تجهیزات کشاورزی
هیدرولیک صنعتی
تجهیزات پنوماتیک
موتور برق
پمپ آب
الکتروموتورهای صنعتی
بازگشت به بالا