Introducing different types of hidden green space sprinklers
Water supply of green space in arid areas is a major challenge. A high percentage of green space creates lawns that are water-rich landscapes.
Due to the environmental, recreational and sports values of lawns, they are an indispensable component in the development of urban green space.
In this article, strategies for effective use of water in lawn areas using library study methods are reviewed and discussed.
According to the obtained results, it was first recommended that the water demand of the nets be calculated using accurate scientific methods.
Eleven strategies including selecting suitable plant species, removing from suitable height, removing itching layer, using wastewater as irrigation source, using superabsorbents, using regulated irrigation, using subsurface irrigation systems, replacing meadows with land Suitable for cover plants, the use of surfactants and other chemicals such as paclobutrazol and endophytic fungi, as individual or combined solutions for efficient use of water in different areas has been suggested.
In some cases, these results can be used as executive guidelines by green space experts to reduce water consumption in this sector, and in other cases, they can be used as preliminary enamel studies for research in the field of sustainable management of gas towers.
Installing a concealed sprinkler for irrigation green space can be a great way to water your lawns regularly, which can also help you save water.
Have you ever considered installing a concealed green space sprinkler? Here are some tips to help you get started:
Different types of nozzles for all types of green space sprinklers
There are four common types of concealed green nozzle nozzles to consider. These include concealed, rotational (impact or gear) and spot irrigation.
Hidden sprinklers for green space
Hidden sprinkler green space is also called pop-up sprinkler. This sprinkler model is often used in permanent underground irrigation system. They have heads that are guided for use to pull the grass out of the ground.
By spraying the spray nozzle, the movement will start in a circle. This rotational motion can include a full circle, a quarter, or a half. When the sprinkler is on, it lifts its head off the ground and returns to the ground when it is off.
You can usually adjust the spray pattern to a width of 45 feet. In general, these systems typically produce one to two and a half inches of water per hour for the covered area within an hour. The hidden sprinkler of the football field is also one of these sprinklers.
These sprinklers have a mechanical nozzle to fire a stream of water. You can usually adjust the spray pattern. Residential models often cover up to 40 feet of water and between 1/2 and 1/4 inches of water per hour over the area.
There are two common types of rotators, including gear and impact models. The impact version uses a spring arm that rotates the nozzle. Then, a stream of water hits a metal plate, turns the head, and disperses the water.
Gear models use water pressure to rotate many gears. This nozzle rotates while the water sprays. Both options work similarly, although the gear options may be more relaxed.
Sometimes micro-irrigation sprinklers are called mini-sprays, spinners or bubbles. These heads provide direct irrigation of certain plants. They work well for rows of plants or gardens with small roots.
Most of them are installed at the base of the plant. However, you can also place them three to five feet apart. They are usually placed on a drip line that is undisturbed.
How does a hidden green space sprinkler work?
All hidden pipes and sprinkler heads of green space are buried under the soil surface, completely hidden and covered with regular grass around them.
When the system is turned on, the hidden sprinklers rise from the ground and return when the system is normally switched off by an automatic irrigation timer.
Here the main procedure is mentioned:
Identify hidden grass and sprinkler locations in your green space: There is little pressure in the water, water pressure, type of sprinkler head and cover requirements are all effective in the design. To have an efficient sprinkler design and proper coverage, you need spray patterns together.
Measure before drilling: Before starting drilling in your yard, make sure that there are no shallow cables or pipes that hit them during installation and interfere with your work.
Take out the pipe: Rotate the pipe on the grass surface and place your sprinkler and fittings where you want to find them.
Dig a hole: Dig a hole along the path of the pipe, making sure it is deep enough that the hidden sprinkler of the green space is below ground level. This will help prevent damage to your lawn mower.
Put the pipe in place: Place the pipe in your hole and separate it approximately 1 meter apart using irrigation pins.
Connection and cutting of connections: Cut your pipe to the desired length and put a locking clamp at the end for the safety of the connections. Tighten the locking clamps at the top and the connections at the top.
Once assembled, set up any reversing timers or preventers that are part of your system.
Seal the end of the pipe: To turn off the end of the pipe, attach an end piece and place it in place with the locking clamp.
Valve connection and timer: The pipe connection to the valve can be done by clicking on the valve connections. A timer is also suggested that can tell the irrigation control valve to open and close at predetermined times for a predetermined period of time.
Hose timers and programmable timers are available. Programmable timers have a wider range of features due to their impressive capabilities.
Turn on the system: Now is a good time to use the system. Check the system for leaks, and remove dirt and other debris before connecting the sprinkler.
Attach the main hiding part: Wrap the plumbing tape around the connection point and screw all the opening windows to it.
Sprinkler nozzles are available in two main types, fixed and rotating spray, with a wide range of spray heights and radii.
Fixed spray heads do not move, they are simply sprayed in a full circle or semicircle.
The rotating spray heads send a high-pressure current and rotate, and can generally cover a larger area.
Some sprinklers have an arc rotation of 40-360 degrees and a reverse rotation with a radius of 25 to 50 feet, both of which irrigate your lawn. A high quality green concealer sprinkler creates fewer problems during its lifetime and requires less maintenance.
Another advantage of choosing a high quality sprinkler is taking care of the design process to ensure that you are as efficient and accurate in your water distribution as possible, helping you save water, save and save the planet.
Green space concealed sprinklers can provide years of service if built well. This service leads to several water domains and saves water consumption and is easy to install and set up.
Before choosing the type of hidden space sprinkler, be sure to thoroughly examine your desired environment so that you can choose the most suitable type of hidden space sprinkler.
The amount of water pressure has a great effect on the efficiency of the sprinkler used.
To measure water pressure, place a sphygmomanometer on your faucet or external water source and then open it for maximum water flow. This measures your static water pressure.
Obviously, you will need to choose a sprinkler that fits your irrigation needs and budget. The right concealer sprinkler depends on the size and overall shape of your garden, as well as the pressure and flow of water from your water source.
Sprinkler prices can vary depending on specifications, quality and manufacturer.