The use of lifts in construction despite its consequences
With the advent of construction lifts in the field of building construction, especially multi-storey buildings, the construction work became much easier for the employees in this field and they were able to carry out their construction process more quickly and easily.
Given the advantages and features that construction lifts have; today, this very useful tool is used a lot in construction so that it is possible to easily and in a fraction of a second transfer mortar and other tools and materials from one floor to higher floors.
However, due to the fact that the material lift works on the use of electricity; Care should be taken in the maintenance of these devices and the necessary precautions should be taken while using this device so that it does not cause any problems for any of the construction workers and other people.
So lifts have their own consequences that need to be considered. One of the problems that may occur for these building materials is the risk of burner dynamo, which power fluctuations can be one of the main causes of burnout of the building lift dynamo, which will be discussed in more detail below.
Familiarity with the components in the construction lift
An lift is generally made up of many parts, which include:
4- Towing wire
9- The key
Each of these components and components together provide a useful function of the lifts. But in the event of any technical problems or malfunctions, the lifts can no longer be expected to function properly.
Their engine is very important in the meantime, you must take the necessary precautions in this regard so that you do not expose your useful equipment in the construction industry to problems and technical problems.
Loss or inefficiency depending on time or the risk of electric shock and related problems can generally be costly for you.
That is why you should be familiar with these parts and the function of each of them in the first place so that as soon as any problem occurs, you can take steps to repair or replace it.
Lift dynamo burns are one of their common problems
One of the most common problems that can be considered a disaster after a period of time and cause the failure of these devices is burns caused by construction lifts, which many causes and factors may cause such a disorder.
Why in general the dynamo of these devices in construction operations may be damaged and exposed to destruction; one of the questions ahead is that there are generally three factors that it is better to consider so that our building lift dynamo is not exposed to failure. These factors include:
1- Using a standard power cable that is connected to the lift switch.
2- Benefiting from the standard length of power cable, which is 25 meters for Chinese motors and 35 meters for Iranian motors.
3- Observing the weight in proportion to the power of the dynamo.
Each of these factors can be a reason for the failure of the dynamo.
Power fluctuations are the main cause of lift dynamo burns
In addition to the factors that we must consider as safety points in forklifts; keep in mind that if the cable wire is small in diameter or too long; It causes a voltage drop that such an event does not provide the necessary current for the electric motor and this issue eventually causes the dynamo to burn.
That is why it is always recommended to pay attention to each of these factors in your construction lifts. The use of substandard and non-standard cables may also be one of the reasons that we will eventually see the burner of the lift dynamo and cost.
In general, it can be acknowledged that among the reasons that may cause problems for the dynamo of these construction tools, power fluctuations are the main cause of burner burns.
Due to the fact that electric current and electric shock can be considered as a great danger for you, it is better to always be careful when using this type of device and be careful with this useful device in the industry.
So that the power fluctuations do not become a problem for you and do not pose a financial or human risk to you and your device.
Protection and care of construction lifts
Construction lifts are among the devices that work using electricity.
That is why it is better to take the necessary precautions when using this device so that it is not a problem for you and the power fluctuations do not lead to burnout of the dynamo and failure of this part and finally the non-functioning and efficiency of construction lifts.
For this reason, it is better to always consider their periodic services as a serious issue and take the necessary precautions regarding the use of this device so that you do not get caught in the costs of repairing and replacing the parts of the device.
In addition, it is better to check all the parts in the lifts at the very beginning when buying them and make sure that the cable is healthy and standard along with other parts in this device.
Finally, you are satisfied with your purchase and do not have to repair and replace your device parts after a period of use.