Use of chainsaws on farmland
Today, providing up-to-date equipment has become one of the daily needs of every gardener and farmer. In such a way that they have forgotten their old tools and have decided to use new and more advanced tools to benefit from modern and better equipment in this regard.
One of these tools used in horticultural lands is a chainsaw or chainsaw, which is widely used by gardeners to prune trees and their foliage. For this reason, samples and different types of chainsaws have been made and marketed to be used by gardeners.
Among the various models of chainsaws on the market today; It is a gasoline chainsaw.
Gasoline saw due to the fact that it works with a combination of gasoline fuel and oil; it is necessary to accurately and standardize the amount of oil used in it in terms of gasoline used to consider the ratio of the two size to use the combination of oil and gasoline in the fuel source of the chainsaw.
Two-stroke gasoline saw
Among the chainsaws available in the market is the gasoline saw, which works with a combination of oil and gasoline.
This type of chainsaw is one of the most efficient types of saws available that you can buy two-stroke or four-stroke type for yourself, and in your garden and agricultural lands, the existence of such a saw is good and Use tooling.
First of all, it should be noted that a four-stroke chainsaw is more efficient than a two-stroke saw.
However, due to the fact that in a two-stroke chainsaw or gasoline saw, a combination of oil and gasoline is used, unlike the four-stroke type chainsaw.
In the following, we will examine this type of saw to discuss the exact and standard amount of oil and its ratio to gasoline in the fuel source of chainsaws. So if you want to use chainsaws on your farmland, stay with us until the end.
Tips on oil to gasoline ratio in chainsaws
As mentioned, in a two-stroke chainsaw, in order to reduce the level of wear and friction, oil is also used along with gasoline in the fuel source of chainsaws or gasoline saws.
In this way, with the continuous movements of the pistons, it is possible to prevent the wear of metal parts and the heat generated so that the engine of the device in question is not exposed to damage and bite.
But it is better to observe the ratio of oil used in this type of saw with the ratio of gasoline used in them as standard.
Therefore, it can be said that the use of oil in chainsaws can lubricate around this type of saw and is useful for parts in the two-stroke saw engine.
But at the same time, if the exact amount of oil relative to gasoline in chainsaws or gasoline saws is not observed properly, your chainsaw or gasoline saw may undergo major repairs or disable its function altogether. That is why the exact amount of oil along with gasoline in a two-stroke chainsaw is important.
What is the exact ratio of oil to gasoline in a chainsaw?
Since the exact ratio of oil to gasoline in a two-stroke chainsaw is of particular importance, in this section we want to discuss this standard amount. It is generally recommended to use 40 or 50 cc of oil per liter of gasoline.
In fact, the ratio of one liter of gasoline to 40 or 50 cc of oil is the standard amount of oil-to-gasoline composition in a two-stroke chainsaw.
In order to know more about the exact and standard amount of oil to gasoline ratio in a two-stroke chainsaw, keep in mind that you should pay attention to the capacity of your gasoline tank when refueling your device.
In this way, if the fuel tank of your chainsaw purchased is equal to 5 liters, you should not fill the entire volume of 5 liters with gasoline. Instead, you have to put 4 and a half liters of gasoline with 250 cc of oil in the combined fuel tank of your chainsaw.
If the capacity of your gas tank is different and is more or less than this amount, you can easily determine the ratio of oil to gasoline according to this simple equation and use this ratio as a standard based on it.
Failure to pay attention to the exact amount of oil to gasoline in the chainsaw
As mentioned above, we should always pay attention to the issue of the amount of oil used as a standard and its combination with gasoline in the chainsaw tank. Now what will happen if this issue is not addressed?
If you do not pay attention to this very important and vital issue in the chainsaw and put a large amount of oil in the gas tank along with the gasoline, the fuel source of the device may not be working properly and you cannot use your device.
Therefore, you will have to take your efficient and useful device as one of your gardening equipment and tools for repair to one of the chainsaw repair centers to solve the problem by charging you a fee. Because it has disrupted the operation of the device.