0
سبد خرید شما خالیست!
میتواند برای مشاهده محصولات بیشتر به صفحات زیر بروید :

How to install gasoline and diesel generators

 Familiarity with generators and their types

 

Generator is one of the tools and devices that are used in various industries. Generators are also used at home. In general, if we want to have a definition of generator, we can introduce them as a device that converts the mechanical energy of different fuels of gas, gasoline and diesel into electrical energy.

 

That is why, according to the fuel consumed in this type of device, they are divided into three types of gasoline generators and diesel or diesel or gas and gas generators.

The use of each of these generators in different industries has its own application and efficiency and can meet the needs of a wide range of people.

 

In addition, each of them has certain advantages and disadvantages that it is better to pay more attention when buying this type of equipment to buy the generator you need.

 

Now that you are very familiar with generators and their types, here is how to install gasoline and diesel generators. If you want to buy any of these generators, you can install them properly after purchase and use them for your own purposes.

 

  Familiarity with generators and their types

 

How to install a gasoline generator

 

Due to the fact that the installation of gasoline generators is different from diesel; in this section, we will install the gasoline generator and in the other part, we will explain the installation of the diesel generator. If you have any of them, how can you install this type of device after purchase?

 

How to install a gasoline generator and set them up is not a difficult task and can be done in only one way. If you have bought a generator and want to install it, it is better to connect the battery cable first.

 

Then you have to pay attention to the positive and negative signs according to the wires that are on the device; it is easy to tell if the red color of the wire is positive and the color black is negative and the colors must be correctly placed on the battery.

 

How to install a gasoline generator

 

After performing these steps very carefully, you should pay attention to the oil of the device. The oil that single-cylinder engines of gasoline engines need is 10w30 according to the factory standards, and if there is not enough budget, due to the high cost of these oils, the 10w30 model can also be used.

 

Of course, it is worth mentioning that if the engine of the device is stuck, the oil should be changed after 5 working hours so that there is no problem for your device.

In the next steps, this process will be done once every 40 hours. In order to install the gasoline generator, after considering the above points, the following steps must be followed in order:

 

Filling the engine oil to a high mark

Filling the fuel tank of the device with gasoline as needed

Opening the gas valve

Putting the throttle lever in the closed position

Putting the device starter on or on

Pulling the handle

Turning the switch to the start position and hold it for three seconds until the engine starts.

Opening the throttle

Connecting the three output plugs and set the circuit breaker to on

 

By performing all the above steps in order, you can easily install and operate your gasoline generator, and by turning it on, you can make good use of the existence of this device for your special purposes.

 

How to install a gasoline generator

 

Installation of diesel generator

 

Now that you are familiar with the installation of a gasoline generator; it is better to provide installation and commissioning of diesel or diesel generator at your service so that if you have a diesel generator, you can also install and operate it.

 

For the installation of a diesel generator, the first possible solution is to pour the generator into the device, which must pour oil into the device from its own inputs in the desired device.

It should be noted that according to the volume of each engine, a certain amount of oil entered the device through its dedicated valves.However, on generators, the indicator is oiled and must be operated according to the standard of the same device.

 

After pouring the oil, the positive and negative wires of the battery should be connected. To do this, it is necessary to know that red, positive and black are negative colors that must be installed properly in the device and then diesel fuel must be introduced into the device to get the generator ready to start.

 

Of course before the start, if your generator is new; It needs to be vented, for which it is better to turn the device into a semi-compressor using the red half-compression handle, and handle it several times and hold the half-compression handle again.

After performing these steps several times, the fuel reaches the engine needle so that the engine is finally ready to start.

For this purpose, the pump lever must be placed in RUN mode and the engine can be started so that your diesel or diesel generator can be installed and commissioned just as easily, and by turning it on, the existence of this device in the industry can be used well. Took.

 

Depending on each of these cases, the diesel or diesel generator can be installed and commissioned, respectively.

Therefore, you should pay attention to the type of generator and according to the type of fuel used in it, follow all the steps mentioned in this article in order so that you can use your device well.

 

درج نظر
دسته بندی ها
خانه
دسته ها
جستجو
0 سبد
پروفایل
تماس
دسته بندی ها
ماشین آلات ساختمانی
مصالح ساختمانی
تجهیزات کشاورزی
هیدرولیک صنعتی
تجهیزات پنوماتیک
موتور برق
پمپ آب
الکتروموتورهای صنعتی
بازگشت به بالا