0
سبد خرید شما خالیست!
میتواند برای مشاهده محصولات بیشتر به صفحات زیر بروید :

How to work with a chainsaw?

A chainsaw is a great tool for cutting down tree trunks and large branches. But where to use and how important it is to work safety is very challenging.

Safety is the most important thing to keep in mind when using a chainsaw. Be sure to read and follow the precautions listed in the chainsaw instructions.

Use the top or bottom of the saw to make the cut, but stay away from the kicker area of ​​the saw, as this can cause the saw to suddenly turn towards you.

When making a cut with a chainsaw, be sure to check it with a handle. Cutting with the bottom chain of the blade is the most common, natural and safe way of cutting.

The saw has little traction and is easy to control by holding the handle firmly.

 

How to work with a chainsaw

 

If this is your first time working with a chainsaw, you should know that working with a chainsaw can be very dangerous if you do not know the safety instructions, techniques and hazards.

 

Steps to work with a chainsaw:

 

1- Reading the manual related to the chainsaw

 

Reading the chainsaw manual will help you to get acquainted with the different parts of the chainsaw machine and learn how to start working with a chainsaw.

 

 Reading the manual related to the chainsaw

 

2- Selecting the appropriate model of chainsaw:

 

Choose a chainsaw that is easy for you to work with and suitable for the project you want to do. Here are some tips to help you choose the right size chainsaw:

 

How to choose the right size of chainsaw:

 

The size of the saw blade should be chosen according to the diameter of the tree trunk. Note that the length of the blade should be one-third the diameter of the tree trunk.

For example, to cut a tree trunk with a diameter of 30 cm, you need to buy a chainsaw with a blade length of 45 cm.

 

The second point is the power of the engine, which is determined in terms of steam, and the longer the length of the blade, the more powerful the engine.

A powerful chainsaw motor allows you to achieve the desired result quickly, easily and in safe conditions.

 

How to choose the right size of chainsaw

 

3- Check the area where you are going to work with the chainsaw:

 

This means that power cords or obstacles such as cars and buildings are not near your workplace to avoid accidents while working with a chainsaw.

 

 Check the area where you are going to work with the chainsaw

 

4- The type of cut you are going to make with a chainsaw is very important:

 

Before you start cutting with a chainsaw or chainsaw, it is very important to pay attention to the fact that you should think about how to cut and do it properly.

For example, how to cut a tree trunk in the garden is different from working with a saw for home use, and you have to do it the right way.

 

 The type of cut you are going to make with a chainsaw is very important

 

5- Filling the fuel tank with the right ratio of gasoline and oil

 

The right combination of oil and gasoline helps the chainsaw to work better, and if this is not observed, the saw motor will burn improperly and work badly, causing serious problems during operation.

 

Filling the fuel tank with the right ratio of gasoline and oil

 

6- Checking the chainsaw before starting to work with the device

 

Items such as checking the chainsaw brake, the standard amount of chain tension and checking the air filter are some of the things that make the chainsaw work in ideal conditions.

 

 Checking the chainsaw before starting to work with the device

 

7- Chainsaw usually has two tanks, one tank is used for fuel and the other for chain oil, usually oil and gasoline tanks have markers.

If the oil and gasoline tank did not have an indicator, know that the larger tank is for fuel and the smaller tank is for chain oil.

 

How to choose the right size of chainsaw

 

8- To turn on the chainsaw, act in such a way that if your saw is equipped with a throttle lever, pull the throttle to transfer the fuel carburetor to the fuel chamber quickly.

Apply the chainsaw brake and set the key to on, then pull the handle firmly to start the engine. If the engine starts and then shuts off, adjust the throttle lever to half and try again.It will usually start by pulling the motor handle 4 or 5 times.

 

How to choose the right size of chainsaw

 

9- When the chainsaw starts working, the chainsaw chain should not move and should not be involved anywhere. Use a tree stump to practice cutting with a chainsaw.

Place the mallet on the cut, release the brake and open the throttle fully, and place the chainsaw on the trunk. Without any pressure on the saw, let the chainsaw perform the cutting operation with its own weight.

Continue to cut with a chainsaw with a full gauze until the blade passes through the trunk.

 

How to choose the right size of chainsaw

 

10 - When working with a chainsaw, unpredictable events may occur, such as getting stuck in a position that you cannot get rid of. Therefore, always carry tools such as axes and hammers when working with a chainsaw so that you can get rid of difficult situations.

 

How to choose the right size of chainsaw

 

11- When the sawing operation is finished, let the chainsaw cool before placing the saw in its chamber. It is also recommended to completely empty the fuel and oil tank after starting work and start the engine once.

To burn the fuel in the carburetor. The duration of this is that if you do not use a chainsaw for a long time, the remaining fuel will deposit as fat in the fuel chamber.

 

 How to choose the right size of chainsaw

 

12- After finishing the work, if you have a storage chamber for chainsaw, put it inside the chamber and put the cover of the saw on the saw, and if there is no cover for the saw, it is recommended to use a cover to hold the chainsaw to increase the life of the chainsaw.

 

How to choose the right size of chainsaw 

 

Important safety tips when working with a chainsaw

 

As mentioned, we need to always follow safety tips and use clothing, goggles, safety shoes and face shield.

 

    Avoid cutting parts or materials that are above the arm.

    Check the chain of the machine before cutting and it is necessary to check it every 20 minutes during cutting.

    Carry a small piece of wood with you to test the machine on before cutting.

    Various events may occur during the cutting operation, such as the saw getting stuck. For this reason, it is recommended to always have materials such as hammers and hammers with us.

When we are not using the device, be sure to activate the device brake.

After cutting operations, it is better to empty the oil and gasoline tank to increase the use and life of the device, and even turn it on once after emptying the tanks so that the fuel in the device is completely drained.

Make sure the chain is sharp and sharpen it with a razor as much as possible.

After using the device, cover its blade with its protector.

 

درج نظر
دسته بندی ها
خانه
دسته ها
جستجو
0 سبد
پروفایل
تماس
دسته بندی ها
ماشین آلات ساختمانی
مصالح ساختمانی
تجهیزات کشاورزی
هیدرولیک صنعتی
تجهیزات پنوماتیک
موتور برق
پمپ آب
الکتروموتورهای صنعتی
بازگشت به بالا