0
سبد خرید شما خالیست!
میتواند برای مشاهده محصولات بیشتر به صفحات زیر بروید :

What is the correct way to vibrate concrete?

 

There are several methods and solutions for vibrating concrete. Among the solutions ahead are manual and mechanical vibration methods. In the meantime, the mechanical method of vibrating concrete is much safer and more suitable, which is done mechanically by the vibrator using its hose in the shortest time and without the need for manpower.

 

 

Concreting buildings

 

One of the stages that is very much considered in construction and must be carried out in the best possible way by observing the relevant points well; Concreting is the building. Building concreting has principles and rules that must be considered by each employee when concreting.

 

Among the points that are very important in concreting buildings; Vibration of concrete is correct and standard. Now, the question or questions may arise as to what is the use of vibrating concrete and how it should be done or what tools can be used to vibrate?

 

Or the question may come to mind that if you do not have the necessary tools for vibrating concrete, can it be done manually or not? These questions and ambiguities can happen to anyone. Therefore, to solve any of these questions, join us in order to answer each of these questions.

 

 Concreting buildings

 

The main reasons for vibrating concrete

 

First of all, the most important causes of concrete vibration are discussed to get acquainted with what concrete vibration is. In general, keep in mind that vibration is one of the most important steps in concreting. Because if you pay attention to this part in construction, you can eliminate all bubbles and excess and free air in the heart of concrete.

 

Failure to pay attention to the vibration of the concrete in any way may cause destructive effects and problems for the concrete, the compensation of which requires a lot of costs. Therefore, in order to avoid any problems ahead, including: cracking of concrete and similar problems, it is better to think more about vibrating and removing any bubbles and excess air inside the concrete.

 

Now that you know the importance of vibrating concrete; It is better to think about vibrating concrete using possible solutions that will be mentioned below.

 

The main reasons for vibrating concrete

 

Possible solutions for vibrating concrete

 

You can generally use two methods, manual or mechanized, to vibrate the concrete. Naturally, the mechanized type with the use of advanced tools and devices can be a better option in front of you so that you can carry out the process of vibrating concrete more easily and with better speed and quality without the need for manpower and putting a lot of pressure on construction workers. .

 

But the manual type of vibration can be one of the possible solutions for you if the desired device is not provided. To better understand the subject, we will fully describe each of these methods.

 

Manual methods of vibrating concrete

 

The easiest way to vibrate is to use manual methods of vibrating concrete. To do this, you can use the following two methods and methods:

 

1- Using flint

 

Flint, which is a tool similar to a hammer. One of the simplest tools is to vibrate the concrete manually. To vibrate the concrete using this device, you have to insert its cross section vertically into the concrete and do it to the deepest part of concreting. Due to the manual nature of this tool, it requires high accuracy.

 

2- Using a shovel

 

Another simple, handy and fully accessible tool is the shovel that can be used to vibrate.

 

Vibrating the concrete with a shovel is such that you have to insert the metal part of the shovel very slowly and vertically into the concrete in the direction of concreting the building and do this several times in the form of reciprocating movements to do so. Arrange that you can get the indoor air out of the concrete.

 

This device is used manually and is used for working on light and small projects.

 

Manual methods of vibrating concrete

 

Mechanical method of vibrating concrete

 

In addition to the manual methods of vibrating concrete mentioned; there is also a mechanical method of vibration, which is a much better and more advanced method and is used in medium and larger projects.

 

This method can be considered a better and safer method that does not require much manpower to vibrate and the work of vibrating concrete is done by a device in this method, which is called a vibrator, which is done by a vibrating hose. , Vibrating action takes place.

 

Vibrator hoses are also available in the market in the form of gasoline, electric, drill and pneumatic, each of which can be used to vibrate concrete, and each has its own application and performance.

 

After choosing the right hose for vibrating, you should pay attention to its size and dimensions. Usually, the best-selling hose, gasoline vibrator hose and the most standard size are 1.5-inch poker diameters between 1, 1.5, 2, 2.5 and 3-inch diameters. It is better to buy 1.5 inch poker diameter. To choose the best vibrator hose and standard size for vibrating concrete correctly and standardize the vibration method. For this purpose, after selecting the appropriate hose and its standard size, the desired hose should be inserted into the concrete vertically and very quickly, and after vibrating, it should be gently removed.

 

The desired machine mechanically vibrates the concrete and eliminates all bubbles mechanically and automatically without the need for manpower in the shortest possible time and with much higher quality.

درج نظر
دسته بندی ها
خانه
دسته ها
جستجو
0 سبد
پروفایل
تماس
دسته بندی ها
ماشین آلات ساختمانی
مصالح ساختمانی
تجهیزات کشاورزی
هیدرولیک صنعتی
تجهیزات پنوماتیک
موتور برق
پمپ آب
الکتروموتورهای صنعتی
بازگشت به بالا